Sofa sectionals develop an instant conversation area when set-up around a fireplace. These sofas include several pieces that move beside each other to form the desired configuration. Some of them include hardware preinstalled to avoid the private sections from separating when someone rests on the Sofa, while others require you to add the hardware yourself.
The most common types of hardware that are currently installed on your sectional include male and female metal brackets that lock the 2 pieces when meshed properly. Analyze the underside of each sofa area to identify the side that consists of the male, the protruding bracket. The male brackets will all be set up on the same side of each private furniture piece, with the female systems set up on the opposite side of each piece.
For example, in between two buddy pieces of the sofa, search for the male hardware on the bottom right side of one area, which should match to a female system on the left side of the next piece or vice-versa. You will need to raise the area with the male hardware and insert it into the female side. Doing this will lock the pieces together.
Store-Bought Connecting Brackets
The steps below work for special connection hardware or any hardware you pick to set up.
Step 1: Count the Joints
The first step is to count the number of joints present in your sectional sofa. You will need a complete set of hardware bracket for each joint. For example, if you have seven areas to your sofa, you’ll require six bracket sets to link the individual areas together.
Step 2: Turn the Sofa Over
You will need to access the undersides of the sofa, therefore turn the individual section to give you access to the rear side. Hold both sides of the bracket as much as the wood frame below the sofa, to evaluate the fit between the 2 parts of the bracket.
Step 3: Mark and Drill
Place a pencil or chalk through each screw hole to mark the screw places on the frame. Attach the drilling piece to the power drill and create a hole on each of the significant areas to avoid splitting or splitting the wood when screwing the brackets in location.
Step 4: Attach Hardware
Insert a screw through the hole in the bracket and tightening it with a power drill and screw bit or a manual screwdriver, this will connect the hardware to the frame. Repeat this step until you attach all the hardware brackets.
Step 5: Secure the Brackets
Connect the two sides of the buddy pieces for the type of hardware you bought. Some utilize a basic latch system, while others have a fork bracket with teeth that fit onto a pin on the other furniture piece that works the very best for pivoting pieces of the sofa.
Also Read: Can You Use Windex On Hardwood Floors?
Gate Hook and Eyes
Instead of forking over approximately $100 or more on specialized sofa connectors and shipping expenses, visit your local hardware store for gate hooks and eyes for each sofa joint. Select hooks that have a spring and a lock slide on them to keep them from unhooking. Install them on the bottom of the sofa in the front, back or in the center to keep the specific sections from moving apart, following the steps above.
Another easy and more inexpensive option and readily available from your local hardware or home improvement shop includes installing a slide-bolt lock below the sofa to keep each sectional connected to its buddy. Follow the actions above to set up these latches.
Also Read: How To Make Kitchen Cabinets Shine
All house improvement and hardware shops carry plastic cable ties that you can attach to the front and back feet of the sofa to keep the sections from separating. Select black cable television ties for dark wood furnishings legs, so they’re not as visible. Wrap the cable television tie around 2 legs of each buddy area, turning the connector part of the tie to the back of the leg to conceal it. Cut off the tail after tightening up the cable television tie in location. When you need to move the sofa somewhere else, cut the cable television ties with a pair of scissors or utility knife, and re-install new ties when required.